Outlook
In 2020, I will continue to present posts which evolve around 4 main categories:
- High performance plastics (incl. high heat)
- Material selection
- Digitalization of the plastics industry
- Automotive applications (electric, fuel cell and internal combustion engine).
I’m looking forward to 2020 which will be filled with fresh topics from the world of polymers.
Last but not least, I would like to thank all readers of my posts!!!
I hope to welcome you next year again.
Thank you and Best regards,
In this post we have a look at 30 publicly traded material stocks and their allover performance in 2019.
21 out of the 30 stocks could make gains for their shareholders (date of estimation: 12.12.2019). The remaining nine corporations look forward to more sunshine in the year 2020.
Reuters Events industry report presented that on the one hand resin demand continuous to grow and on the other hand petrochemical companies feel pressure caused by slowing economic growth outlook, US-China trade war and the sudden rage against plastics.
Further, in 2020 new polyethylene resin capacity in the US will go online and could lead to an oversupply in the market. This will keep the resin prices down and puts even more pressure on the margins.
However, in the long-term perspective, plastics industry counts with a yearly polyolefin market growth of 3 to 4% per year. World population is growing and access to clean water over piping system is in high demand, as well as medical care products and electronics.
Thanks for reading & till next time!
Greetings,
Herwig Juster
In this blog post we discuss how to estimate the investment needed to expand an existing capacity of a polymerization plant.
Basic investment concept is the economy of scale which says that the relationship of scale to investment is not linear.
It behaves in an exponential way.
This is shown by the mathematical relationship formula below:
The equation has an exponent which is called the “Lang Factor”. It varies depending on the plant size you would like to realize. For a full plant expansion, the Lang Factor varies typically between 0.6 and 0.7.
In chemical engineering this exponential relationship is called the “0.6 rule” or “six-tenths rule”.
For better illustration of the equation the following example of a polyethylene (PE) plant expansion is considered.
The old plant has a capacity of 1 million metric tons PE and the new plant should have 2 million metric tons capacity. Original investment was 1 billion Euros.
How much capital investment is needed to double the production capacity?
1.57 billion Euros are needed.
This is an increase of 57% in capital needed to double the capacity.
There are other factors such as inflation which needs to be considered too.
Altogether, it is a useful tool for a first estimation of capital costs.
In recent years, functional polymers got more and more attention, especially from the robotics world. In this blog post, we are going to review the basic concepts of active polymers and make a deep dive into electroactive polymers used in robotic applications.
What are active polymers?
In general, there are non-electrically deformable polymers (NDPs) and electroactive polymers (EAPs). NDPs are actuated by non-electric stimuli such as pH, UV light exposure, or temperature changes. EAPs are actuated by an electric stimulus. EAPs can be divided into two different classes: electronic EAPs (changes by an applied electric field) and ionic EAPs (changes due to diffusion of ions).
Major differences between electronic and ionic EAPs
Electronic EAPs need high activation fields (>150 V/µm) and these high values are close to the maximum voltage required to electrically breakdown electronic EAPs. In general, breakdown strength is the maximum dielectric strength of a given material. Furthermore, electronic EAPs can hold a certain deformation upon triggering through a DC voltage. This particular property makes them highly interesting for robotic applications. Electronic EAPs can operate under standard atmospheric conditions and have a fast response time in range of milliseconds upon triggering.
Ionic EAPs need a low activation voltage of usually 1 - 5 V to obtain actuation movements. Actuation forces in ionic EAPs are lower compared to electronic EAPs and the response is also considerably slower. Hydrolysis is a concern when operating in aqueous systems. Looking at the deformation mechanism, it is more similar to a muscle deformation. Bending is the main movement of ionic EAPs. The major downside of ionic EPAs is that operation should be either carried in wet environment, or in solid electrolytes.
Overall, movements such as bending, stretching, or contracting can be achieved by both, electric and ionic polymers.
EAPs and robotic applications
In recent years, robotic applications have been increasing and the mechanical as well as electrical functionality of robotic hardware have difficulties to keep up with this fast application development.
With the introduction of EAPs into the robotics world, this is about to change. One motivation to use EAPs is for straight-line motions. Such kinds of motions are difficult to make without a complex powertrain behind. Robots which are equipped with several powertrains to make different kind of movements become bulky. This reduces the chance of sending such robots on sensitive missions. Partial removing of powertrains can lead to better energy efficiency too. EAPs are inherently flexible and allow applications in the field of biomimetic machines. In nature, animals have soft and smooth actuation members (e.g. hands and fingers). It is aimed to imitate such soft actuators in robotics as well.
Among EAPs, piezoelectric polymers are more and more in use for actuators. Piezoelectric (mechanical stress generates an electric field) polymers use Poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)). The high electronegativity of fluorine atoms creates local dipoles (separation of the positive and negative charges) on the polymer backbone. As a consequence, polarized domains are formed by the local dipoles, together with an alignment in the electric field.
In general, (P(VDF-TrFE)) copolymers have a Young’s modulus of up to 10 GPa, allowing high mechanical energy densities. Electrostatic strains of up to 2% can be obtained applying a large electric field (~200 MV/m).
Apart of robotic actuators, piezoelectric polymers are used in force/pressure sensors, loudspeakers, piezo switches and printed memory applications.
One application example is a button made out of a material called Solvene® (prev. Solvay S.A.; now Syensqo), where mechanical stresses lead to an electrical field which can be detected. This is shown below in the Youtube-video.
We will see more and more commercial robotic applications using EAPs. Apart of robotics, sensor functions in automotive can be taken over by such polymers from wheel condition monitoring to steering wheel motion monitoring.
